PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3
Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
Financial Services
PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3
Over view:
Common Name: Benzyl Dimethyl Amine
Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,
Physical and chemical properties:
Appearance Form: transprant light yellow liquid
Odour no data available
PH 10 at 10 g/l at 20 °C
Melting point/freezing point Melting point/range: -75 °C - lit.
Initial boiling point and boiling range 181 - 184 °C at 1.020 hPa - lit.
Flash point 53 °C - closed cup
Evaporation rate no data available
Flammability (solid, gas) Upper explosion limit: 6,3 %(V)
Upper/lower flammability
or explosive limits Lower explosion limit: 0,9 %(V)
Relative density 0,9 g/cm3 at 25 °C
Water solubility soluble
Partition coefficient: noctanol/water log Pow: 1,87
Molar formular C9H13N
Molar mass 135.21
Features and uses:
A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.
BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.
BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.
BDMA is used in flexible slabstock and rigid foam applications.
It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.
BDMA is also used for flexible slabstock foam applications.
Storage Information
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use.
Package:
180KG/Steel Drum
(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)
More :https://www.newtopchem.com/archives/516
Over view:
Common Name: Benzyl Dimethyl Amine
Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,
Physical and chemical properties:
Appearance Form: transprant light yellow liquid
Odour no data available
PH 10 at 10 g/l at 20 °C
Melting point/freezing point Melting point/range: -75 °C - lit.
Initial boiling point and boiling range 181 - 184 °C at 1.020 hPa - lit.
Flash point 53 °C - closed cup
Evaporation rate no data available
Flammability (solid, gas) Upper explosion limit: 6,3 %(V)
Upper/lower flammability
or explosive limits Lower explosion limit: 0,9 %(V)
Relative density 0,9 g/cm3 at 25 °C
Water solubility soluble
Partition coefficient: noctanol/water log Pow: 1,87
Molar formular C9H13N
Molar mass 135.21
Features and uses:
A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.
BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.
BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.
BDMA is used in flexible slabstock and rigid foam applications.
It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.
BDMA is also used for flexible slabstock foam applications.
Storage Information
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use.
Package:
180KG/Steel Drum
(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)
More :https://www.newtopchem.com/archives/516
PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3
Over view:
Common Name: Benzyl Dimethyl Amine
Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,
Physical and chemical properties:
Appearance Form: transprant light yellow liquid
Odour no data available
PH 10 at 10 g/l at 20 °C
Melting point/freezing point Melting point/range: -75 °C - lit.
Initial boiling point and boiling range 181 - 184 °C at 1.020 hPa - lit.
Flash point 53 °C - closed cup
Evaporation rate no data available
Flammability (solid, gas) Upper explosion limit: 6,3 %(V)
Upper/lower flammability
or explosive limits Lower explosion limit: 0,9 %(V)
Relative density 0,9 g/cm3 at 25 °C
Water solubility soluble
Partition coefficient: noctanol/water log Pow: 1,87
Molar formular C9H13N
Molar mass 135.21
Features and uses:
A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.
BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.
BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.
BDMA is used in flexible slabstock and rigid foam applications.
It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.
BDMA is also used for flexible slabstock foam applications.
Storage Information
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use.
Package:
180KG/Steel Drum
(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)
More :https://www.newtopchem.com/archives/516
Tipo
Novo
Valor
$10 (USD)
Status
Em estoque
0 Comentários
0 Compartilhamentos
English
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Dutch
Italiano
Russian
Romaian
Greek