The process of China Automotive Bumper Mold molding involves several steps:

1. Mold Preparation: The China Automotive Bumper Mold is inspected, cleaned, and prepared to ensure it is in good condition for the production run.
2. Material Selection: A suitable thermoplastic material, such as polypropylene or polyurethane, is chosen for the bumper's production. The material is then melted down and prepared for injection.
3. Injection: The melted material is injected into the mold cavity under high pressure. This process allows the material to fill all the intricate details of the mold and form the desired shape of the bumper.
4. Cooling: Once the mold cavity is filled, the material is cooled rapidly to solidify and take the shape of the mold. Cooling can be accelerated through the use of cooling channels within the mold.
5. Ejection: After the material has solidified, the two halves of the mold are separated, and the finished bumper is ejected from the mold. The mold is then ready for the next production cycle.