US Standard Mini Filter As a professional pressure filter designer and manufacturer, HiPerk wants to provide filtration solutions for its clients and customers. All the parties - filter user, filter provider and filter media supplier are expected to collect necessary technical information before design and build a filter project. HiPerk Lab Mini Filter was born for this purpose. A practical test will give an application best definitive answer for capacity of filter; cycle time; pressure needs; cake thickness design and cake washing solutions. HiPerk Lab Mini Filter is able to carry out the following tests: 鈼?Laboratory filter testing; 鈼?Actual material simulation test; 鈼?Filter cloth suitability & performance test. HiPerk Mini Filter is cute small; the floor cover size is less than 240mm square only. The filter cloths requested for testing is merely less than 脴 100 mm square. Slurry demand as less as 1 liter. Its portable design can be conveniently carried to travel so that you can take it to a job-site service. HiPerk Mini filter press is a patent protection product developed by HiPerk itself in the 2017. Technical Information of HiPerk Lab Mini Filter: 01) working pressure: 0.8 MPa ~ 1.6 MPa 02) filter cloth demand: 脴 95mm disc 03) base size in use: 240mm X 195mm 04) height in use: 717 mm 05) power of pressure: compressed air 06) standard cake: cylinder 07) cake thickness: 25mm / 32mm 08) filter area: 82 cm2 / 0.088 ft2 09) frame: round side bars 10) pressure maintaining: screw stem (mechanical) 11) capacity (cake): 102.5 cc / 0.00362 cu.ft 12) number of filter plate: 2 13) number of cake: 1 14) pressure vessel: transparent & reinforced 15) volume of pressure vessel: 1200 cc 16) net weight: 22.5 kg 17) gross weight (packaged ): 30 kg 18) external size of package: 460mm X 285mm X 710mmUS Standard Mini Filter website:http://www.hiperk.net/mini-filter/