CAS: 90-72-2 2,4,6-Tris(dimethylaminomethyl)phenol Production Process and Method Brief introduction. 2,4,6-tris(dimethylaminomethyl)phenol, an organic chemical substance, molecular formula: C15H27N3O. Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol Foreign name: 2,4,6-Tris(dimethylaminomethyl)phenol English alias: 2,4,6-tris[(dimethylamino)methyl]phenol Alias: Epoxy accelerator DMP-30; Tris(dimethylaminomethyl)phenol Appearance: transparent liquid Chemical formula: C15H27N3O Molecular weight: 271.4314 CAS No.: 90-72-2 EINECS number: 202-013-9 Boiling point: 320.50 ℃ Density: 1.054 g/cm³ Flash point: 116.63 ℃ Refractive index: 1.517 Epoxy resin curing accelerator DMP-30 is 2,4,6 tris(dimethylaminomethyl)phenol, which is a tertiary amine curing agent. It can be used as an epoxy resin curing agent at room temperature, and also as an efficient accelerator for acid anhydride, polyvinylamine and aliphatic polyamine curing agents. This product contains phenolic hydroxyl group in its molecular structure, so the activity is increased and it can be used for fast curing, mainly for thermosetting epoxy resin curing agent and adhesive, and it can be used as accelerator of acid anhydride curing agent and amide curing agent for casting and pressure layer products, the amount of this product as curing agent is generally about 3-13%, and the amount as accelerator is generally 0.1-3%. This product can be used as a catalyst in rubber anti-ozone agent and rigid polyurethane foam raw material combination polyether. Production process. 2000L reaction kettle, 200kg of phenol, 720kg of dimethylamine, 520kg of formaldehyde added dropwise below 50 degrees. kg, after drop addition, raise the temperature to 70 degrees, keep warm for 2 hours, lower the temperature to 50 degrees, add 100 kg of sodium chloride Sodium chloride, stir, let stand, stratify, and dehydrate the crude product under pressure. Method of preparation. After the reaction of phenol with dimethylamine and formaldehyde, the reaction products are stratified, dehydrated under vacuum and filtered to obtain the finished product. Theoretical unit consumption: (one ton of product) Phenol: 400 kg Dimethylamine (40% aqueous solution) 1440kg Formaldehyde (37% aqueous solution) 1040kg Produce waste water about 1.8 tons, mainly containing a small amount of formaldehyde Dosage: As accelerator dosage is about 1~5% As a curing agent dosage of about 10% Application areas. Use one Used as curing agent for thermosetting epoxy resin, adhesive, binder for laminate material and flooring, acid neutralizer and catalyst in polyurethane production Application 2 Used as antioxidant, also used in dye preparation Application 3 Used as curing agent for thermosetting epoxy resin, adhesive, sealant for laminate materials and flooring, acid neutralizer and catalyst in polyurethane production. Numbering system. CAS No.: 90-72-2 MDL No.: MFCD00008330 EINECS No.: 202-013-9 RTECS No.: SN3500000 BRN No.: 795751 PubChem No.: 24900319 Safety information. Package Class: III Hazard Class: 8 Customs Code: 29222900 Dangerous Goods Transport Code: UN 2735 8/PG 3 WGK Germany: 1 Hazardous category code: R22; R36/38 Safety instructions: S26-S28-S2 RTECS number: SN3500000 Dangerous Goods Marking: Xn Safety terminology. S26 - Immediately after inadvertent contact with eyes, flush with plenty of water and seek medical advice. S28 - Immediately after inadvertent contact with skin, flush with plenty of soapy water. S2 - Avoid contact with children. S61 - Avoid release into the environment. Refer to special instructions/safety data sheet. S45 - In case of accident or discomfort, seek immediate medical attention (if possible, show its label). S36/37/39 - Wear appropriate protective clothing, gloves and goggles or mask. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/39733

TMEDA (N,N,N',N'-Tetramethylethylenediamine) CAS No.:110-18-9 Over view Common Name: N,N,N',N'-Tetramethylethylenediamine Other Chemical Names: N,N,N',N'-Tetramethylethane-1,2-diamine, electrophoresis grade;Four MethylEthylenediaMine;N,N,N',N'-TetraMethylethylenediaMine Molar formular C6H16N2 Molar mass 116.2 Physical and chemical properties: a) Appearance Form: Transparent colorless liquid b) Melting point/freezing point Melting point/range: -55 °C - lit. c) Initial boiling point and boiling range 120 - 122 °C - lit. d) Flash point 20 °C - closed cup e) Evaporation rate no data available f) Flammability (solid, gas) no data available g) Upper/lower flammability or explosive limits Upper explosion limit: 9,08 %(V) Lower explosion limit: 0,98 %(V) h) Relative density 0,775 g/cm3 at 20 °C i) Water solubility soluble j) Partition coefficient: log Pow: 0,3 Features and uses: NT CAT TMEDA is a colorless-to-straw, liquid, tertiary amine with a characteristic aminic odor. It is readily soluble in water, ethyl alcohol, and other organic solvent. It is used as an intermediate in organic synthesis. It is also used as a cross linking catalyst for polyurethane rigid foams. Storage Information NEWTOP Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. Package: 160KG Steel Drum (Toyocat TE/ Kaolizer 11/ Dabco TMEDA) More：https://www.newtopchem.com/archives/41215

PU catalyst： MB20 CAS#: 34364-26-6 Overview: Common Name: BISMUTH NEODECANOATE Other Chemical Names: Neodecanoicacid,bismuth(3+)salt;neodecanoicacid,bismuth(3++)salt;BISMUTHNEODECANOATE;BISMUTH(III)NEODECANOATE;bismuth(3+)neodecanoate;BISMUChemicalbookTHNEODECANOATE,TECH;Bismuth(III)neodecanoate,superconductorgrade~60%inneodecanoicacid(15-20%Bi);Bismuth(III)neodecanoate,superconductorgrade a) Appearance and Properties: Liquid Color: light yellow transparent b) Boiling point, initial boiling point and boiling range 180 °C c) Flash point 158 °C - closed cup d) Evaporation rate No data available e) Flammability (solid, gas) no data available f) high/low flammability or explosiveness limits no data available g) Vapor pressure 0.60mmHg at 21 °C h) Vapour density No data available i) Density/relative density 1.22 g/cm3 at 25 °C j) water soluble insoluble k)n-octanol/water partition coefficient no data available l) Autoignition temperature no data available m) Decomposition temperature no data available n) Viscosity 50mPa.s at 25 °C Features and uses: MB20 is used as a catalyst in the polyurethane industry, showing high catalytic activity, and is widely applicable to spray, high density elastomer, and microcellular elastomer systems. Has the following characteristics: A powerful gel catalyst to promote the completion of the reaction in the later stage; It shows that the viscosity of the system is delayed when the level of intermolecular reaction is low in the early stage of the reaction; Environmentally friendly products that can replace lead and tin-containing catalysts; In the common polyurethane reaction system, the microcellular elastomer system and the high-density semi-rigid foam system enhance the stability of the system reaction. Acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting excellent back-end cure. It is free of mercury, lead and dibutyl tin. Possesses low volatility with little or no odor. It has compatibility with common rigid and flexible foam polyols. It is an alternative to tin-based catalysts in flexible slabstock, high-density flexible foams, spray, microcellular, and rigid foam systems. Storage Information Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. Package: 25kg/Plastic Drum, 200KG/Steel Drum, 1000kg/IBC Drum More：https://www.newtopchem.com/archives/39757

Dicyclohexylamine CAS 101-83-7 Descriptions： Product:Dicyclohexylamine Synonyms:N,N-Dicyclohexylamine;Perhydrodiphenylamine;DCHA Molecular Formula:C12H23N Molecular Weight:181.32 CAS:101-83-7 EINECS:202-980-7 InChI:1S/C12H23N/c1-3-7-11(8-4-1)13-12-9-5-2-6-10-12/h11-13H,1-10H2 Physicochemical properties： Melting point: -2ºC Boiling point: 256ºC Water solubility: 1G/L(20ºC) Refractive index: 1.4832-1.4852 Flash point: 103ºC Density: 0.912 Properties descriptions: Colorless transparent oil liquid,pungent ammonia smell，flammable and high toxic. Melting point is about 20℃，Freezing point-2℃，Boiling point 255.8℃（Decomposition），87-93℃（1.73kPa），Relative density0.9103（20、4℃），Refractive index 1.4823，1.4842，Flash point 96℃。Miscible with organic solvents, slightly soluble in water, strongly alkaline. Safety information： Safety descriptions:S26：in case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S45：If you have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S60：The substance residues and containers must be disposed of as hazardous waste S61：Avoid discharge of this substance residue into the environment. Refer to special instructions/safety data sheets. S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks. Dangerous mark:C：Corrosive substance N：Environmental hazardous substance Risk codes: R22：Harmful if swallowed. R34：Causes burns R50/53：Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. UN code :UN2565 MSDS report: Dicyclohexylamine MSDS report Storage and transport information： It should be sealed and stored in a dry and cool ventilated warehouse Other information： Product application:Used in organic synthesis and as insecticide, acid gas absorbent, steel anti-rust agent. Production method and others: Dicyclohexylamine was prepared by hydrogenation of aniline at high temperature and high pressure in the presence of catalyst. Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/dicyclohexylamine-cas-101-83-7-pdf/

N,N-dimethylcyclohexylamine CAS 98-94-2 Descriptions： Product:N,N-dimethylcyclohexylamine CAS: 98-94-2 Physicochemical properties： Density 0.9±0.1 g/cm3 Boiling point 162.0±8.0 °C at 760 mmHg Melting point -60 °C Molecular Formula C8H17N Molecular Weight 127.227 Flash point 42.2±0.0 °C Accurate mass 127.136101 PSA 3.24000 LogP 2.12 Appearance Transparent liquid Vapor pressure 2.2±0.3 mmHg at 25°C Refractive index 1.460 Stability 1.Stabilization 2.Forbidden ligand strong oxidant, strong acid, acyl chloride, anhydride 3.Avoid heat in contact conditions 4.Hazardous Polymerization no polymerize Water solubility 10 g/L (20 ºC) Freezing point <-77℃ Molecular structure 1、Molar refraction index：40.89 2、Molar volume（cm3/mol）：149.3 3、Parachor（90.2K）：345.1 4、Surface tension（dyne/cm）：28.5 5、Polarizability：16.21 Application: 【1】 Mainly used as polyurethane rigid foam catalyst 【2】 N, N-dimethylcyclohexylamine can be used in a wide range of rigid foams. One of the main applications is for insulating foams, including sprays, plates, laminated sheets and refrigeration formulations. N, N- dimethylcyclohexylamine is also suitable for the manufacture of rigid foam furniture frames and decorative parts. The catalyst can be used as the main catalyst alone, without adding organic tin, or supplemented with JD series catalyst according to the process and product requirements. It is also used as a rubber accelerator and as an intermediate in synthetic fibers. 【3】 Used as dye intermediates, used for vanillin, azo dyes, triphenylmethane dyes, also can be used as solvents, stabilizers, analytical reagents and so on. Also used as a catalyst. Storage and transport information： 1.Store in a cool and ventilated warehouse. Keep away from fire and heat source. The storage temperature should not exceed 30℃. Keep container sealed. Should be stored separately with oxidizer, acid, etc., do not mix storage. Explosion-proof lighting and ventilation facilities are adopted. Do not use mechanical equipment and tools that may cause sparks. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials. 2.Packed in iron drums, 50kg/ drum, 170kg/ drum. Flammable liquid <2>, sealed, stored in a cool place, away from fire source, fire transportation. Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/nn-dimethylcyclohexylamine-cas-98-94-2-pdf/

N,N-Dicyclohexylmethylamine CAS 7560-83-0 Descriptions： Product：N,N-Dicyclohexylmethylamine Synonyms：EINECS 231-453-4，N-Methyldicyclohexylamine，NN-Dicyclohexylmethylamine，N-Cyclohexyl-N-methylcyclohexanamine，Cyclohexanamine,N-cyclohexyl-N-methyl- MFCD00014289 CAS：7560-83-0 Physicochemical properties： Density 0.9±0.1 g/cm3 Boiling point 262.7±8.0 °C at 760 mmHg Molecular Formula C13H25N Molecular Weight 195.344 Flash point 110.6±0.0 °C Accurate mass 195.198700 PSA 3.24000 LogP 4.18 Appearance Transparent, light yellow Vapor pressure 0.0±0.5 mmHg at 25°C Refractive index 1.492 More 1. Properties：no 2. Density（g/mL,25/4℃）： 0.912 3. Relative vapor density（g/mL,air=1）：no 4. Melting point（ºC）：no 5. Boiling point（ºC,atmospheric）：265 6. Boiling point（ºC,5.2kPa）： no 7. Refractive index：1.49 8. Flash point（ºC）： no 9. Specific rotation（º）：no 10. Spontaneous ignition point or ignition temperature（ºC）：no 11. Vapor pressure（kPa,25ºC）：no 12. Saturated vapor pressure（kPa,60ºC）：no 13. Combustion heat（KJ/mol）：no 14. LCT（ºC）：no 15. Critical pressure（KPa）：no 16. Log value of oil/water (octanol/water) partition coefficient：no 17. UEL（%,V/V）：no 18. LEL（%,V/V）： no 19. Solubleness：no Storage and transport information： It should be sealed and stored in a dry and cool ventilated warehouse Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/nn-dicyclohexylmethylamine-cas-7560-83-0-pdf/

cyclohexylamine CAS 108-91-8 Descriptions： Product:cyclohexylamine Synonyms： Cyclohexylamine(6CI,8CI);1-Aminocyclohexane;1-Cyclohexylamine;Aminocyclohexane;Aminohexahydrobenzene;Benzenamine, hexahydro-;Hexahydroaniline; Monocyclohexylamine Molecular Formula:C6H13N Molecular Weight:99.17 CAS:108-91-8 EINECS:203-629-0 InChI:1S/C6H13N/c7-6-4-2-1-3-5-6/h6H,1-5,7H2 Physical and chemical properties： Melting point: -17ºC Boiling point: 133-134ºC Water solubility: MISCIBLE Refractive index: 1.458-1.46 Flash point: 27ºC Density: 0.867 Properties descriptions: Colorless and transparent liquid，stimulating odor,freezing point -17.7℃，Boiling point 134℃，36.4℃（2.66kPa），Relative density0.8647（25/25℃），0.8191（20/4℃），Refractive index1.4585（20℃），Flash point（open cup）32.22℃。Miscible with water and general organic solvents,including alcholos,esters,ketones, ethers, aliphatic, hydrocarbons, aromatic hydrocarbons and chlorine-containing compounds. Form an azeotrope with water, boiling point 96.4℃，containing water 55.8℃。It has strong organic base properties, and the PH value of 0.01 aqueous solution is 10.5. Safety information： Safety descriptions: S45：If have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S1/2：Keep sealed and keep away from children. S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks Dangerous mark:C：Corrosive substance Risk code : R10：Flammable。 R34：Causes burns. R21/22：Harmful in contact with skin and if swallowed. UN code:UN2357 MSDS report: cyclohexylamine MSDS report Storage： It should be sealed and stored in a dry and cool ventilated warehouse. Packaging： 200KG/drum storage：It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/cyclohexylamine-cas-108-91-8-pdf/