NT CAT PC-5 CAS No.: 3030-47-5 Product Application Brief introduction. Chemical name: N,N,N′,N′,N″-Pentamethyldiethylenetriamine Alias: Pentamethyldiethylenetriamine Abbreviation: PMDETA English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine Molecular formula: C9H23N3 Relative molecular mass 173.3 CAS No. 3030-47-5 Applications. Pentamethyldiethylenetriamine (PMDETA) is a highly active tertiary amine foaming catalyst, PMDETA has a strong foaming effect, which can improve the flow of foam and enhance the quality of products.PMDETA can also be used as a ligand for polyurethane foam catalysts and a ligand for functional polymerization materials. In addition, other applications are exemplified as follows. 1. Preparation of a two-phase amine absorber for capturing CO2. The two-phase amine absorber is a three-component system consisting of diethylenetriamine, pentamethylenetriamine, and water, and the total concentration of diethylenetriamine and pentamethylenetriamine in water is 4~5 mol/L, and the molar ratio of diethylenetriamine to pentamethylenetriamine is 1:4~4:1; these two organic amines alone do not have the ability to split the phase after absorbing CO2 in aqueous solution, but the two-phase amine absorber composed of the three-phase system But the two-phase amine absorber composed of this ternary system has the performance of phase separation, which is a homogeneous solution before absorbing CO2, and is divided into two phases after absorbing CO2 saturation. After saturated absorption, CO2 is enriched in the aqueous phase, and after phase separation, only the solution enriched in the CO2 phase needs to be regenerated thermally, thus greatly reducing the amount of enriched liquid required for regeneration, effectively reducing regeneration energy consumption, and also maintaining efficient CO2 absorption performance, which has a wide range of application prospects. 2. A methanol gasoline power accelerator. The accelerator consists of: isooctanol, aminoacetaldehyde diethyl acetal, 1,5-cyclooctadiene, 2-acetylbenzofuran, propargyl alcohol, n-propanol, zinc naphthenate, dinonyl naphthalene sulfonic acid, dipolyoxyvinyl aliphatic amine, and pentamethyldiethylenetriamine. The preparation method includes: a. Add isooctanol, aminoacetaldehyde diethyl acetal, 1,5-cyclooctadiene, 2-acetylbenzofuran to the reaction kettle and stir the reaction for 40-50 minutes at 60-62°C with closed ultrasonic stirring, b. Mix n-propanol, zinc naphthenate, dinonyl naphthalenesulfonic acid and stir for 15-25 minutes; c. Add propargyl alcohol, the mixture in step b, dipolyoxyvinyl fatty amine, pentamethyl diethylenetriamine, add them to the mixture in step a in turn, stir for 20~25 minutes at 33~35℃, and then cool down to obtain. Quality index. Content: ≥98% Specific gravity: 0.8330-0.8410 Refractive index: 1.4430-1.4450 Storage and transportation. Should be sealed and stored in a dry, cool and ventilated warehouse Packing. 200KG/drum Storage: It is recommended to be stored in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/668

PU catalyst： MB20 CAS#: 34364-26-6 Overview: Common Name: BISMUTH NEODECANOATE Other Chemical Names: Neodecanoicacid,bismuth(3+)salt;neodecanoicacid,bismuth(3++)salt;BISMUTHNEODECANOATE;BISMUTH(III)NEODECANOATE;bismuth(3+)neodecanoate;BISMUChemicalbookTHNEODECANOATE,TECH;Bismuth(III)neodecanoate,superconductorgrade~60%inneodecanoicacid(15-20%Bi);Bismuth(III)neodecanoate,superconductorgrade a) Appearance and Properties: Liquid Color: light yellow transparent b) Boiling point, initial boiling point and boiling range 180 °C c) Flash point 158 °C - closed cup d) Evaporation rate No data available e) Flammability (solid, gas) no data available f) high/low flammability or explosiveness limits no data available g) Vapor pressure 0.60mmHg at 21 °C h) Vapour density No data available i) Density/relative density 1.22 g/cm3 at 25 °C j) water soluble insoluble k)n-octanol/water partition coefficient no data available l) Autoignition temperature no data available m) Decomposition temperature no data available n) Viscosity 50mPa.s at 25 °C Features and uses: MB20 is used as a catalyst in the polyurethane industry, showing high catalytic activity, and is widely applicable to spray, high density elastomer, and microcellular elastomer systems. Has the following characteristics: A powerful gel catalyst to promote the completion of the reaction in the later stage; It shows that the viscosity of the system is delayed when the level of intermolecular reaction is low in the early stage of the reaction; Environmentally friendly products that can replace lead and tin-containing catalysts; In the common polyurethane reaction system, the microcellular elastomer system and the high-density semi-rigid foam system enhance the stability of the system reaction. Acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting excellent back-end cure. It is free of mercury, lead and dibutyl tin. Possesses low volatility with little or no odor. It has compatibility with common rigid and flexible foam polyols. It is an alternative to tin-based catalysts in flexible slabstock, high-density flexible foams, spray, microcellular, and rigid foam systems. Storage Information Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. Package: 25kg/Plastic Drum, 200KG/Steel Drum, 1000kg/IBC Drum More：https://www.newtopchem.com/archives/39757

N,N-Dicyclohexylmethylamine CAS 7560-83-0 Descriptions： Product：N,N-Dicyclohexylmethylamine Synonyms：EINECS 231-453-4，N-Methyldicyclohexylamine，NN-Dicyclohexylmethylamine，N-Cyclohexyl-N-methylcyclohexanamine，Cyclohexanamine,N-cyclohexyl-N-methyl- MFCD00014289 CAS：7560-83-0 Physicochemical properties： Density 0.9±0.1 g/cm3 Boiling point 262.7±8.0 °C at 760 mmHg Molecular Formula C13H25N Molecular Weight 195.344 Flash point 110.6±0.0 °C Accurate mass 195.198700 PSA 3.24000 LogP 4.18 Appearance Transparent, light yellow Vapor pressure 0.0±0.5 mmHg at 25°C Refractive index 1.492 More 1. Properties：no 2. Density（g/mL,25/4℃）： 0.912 3. Relative vapor density（g/mL,air=1）：no 4. Melting point（ºC）：no 5. Boiling point（ºC,atmospheric）：265 6. Boiling point（ºC,5.2kPa）： no 7. Refractive index：1.49 8. Flash point（ºC）： no 9. Specific rotation（º）：no 10. Spontaneous ignition point or ignition temperature（ºC）：no 11. Vapor pressure（kPa,25ºC）：no 12. Saturated vapor pressure（kPa,60ºC）：no 13. Combustion heat（KJ/mol）：no 14. LCT（ºC）：no 15. Critical pressure（KPa）：no 16. Log value of oil/water (octanol/water) partition coefficient：no 17. UEL（%,V/V）：no 18. LEL（%,V/V）： no 19. Solubleness：no Storage and transport information： It should be sealed and stored in a dry and cool ventilated warehouse Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：[email protected] [email protected] More：https://www.ohans.com/nn-dicyclohexylmethylamine-cas-7560-83-0-pdf/