High holding power anchor has two types. One is stock HHP anchor, like danforth anchor and another one is stockless HHP anchor such as AC-14 anchor. It is widely used for dredging, offshore mooring, fish farm, and yachting operation. Standard or fully balanced type for your ship design. With SS316L material option or with H.D.G. finishing for your multi-purposes. All high holding power anchors provided by YSmarines which is one of the leading suppliers in china for high-quality marine equipment have been approved by ABS, LR, DNV, GL, BV, RINA, BKI, CCS, etc.

Delta Flipper High Holding Power(HHP) Anchor

Delta flipper anchor is a superior high holding power anchor with its easy handling and rapid penetration in different soil conditions and is well known worldwide. The HHP anchor has an open construction for smooth penetration in different kinds of soil and no rotation, which means no decrease of holding capacity and no dragging of the anchor. It is manufactured from high tensile steel. It normally used in the offshore project with high holding power.

High Holding Power (HHP) Danforth Anchor

Danforth anchor is the high holding power anchor associated with Danforth Standard. It is a well-known HHP anchor in the offshore, dredging and shipping sectors. The shank is made of high strength steel and the flukes are strong and wide. Sometimes, it will be required hot-dipped galvanized coating for long protection. The lightweight and compact flat design make it easy to retrieve and relatively easy to store. The anchor can be disassembled for storage and it features an adjustable 32° and 45° shank/fluke angle to improve holding capability in common sea bottoms such as hard sand and soft mud.

AC-14 High Holding Power(HHP) Anchor

AC-14 anchor is a stockless HHP anchor with wide anchor crown, thick and long flukes, and longitudinal ribs. It is available in a self-colored finish or in a galvanized finish. Its design provides excellent weight to performance ratios. The lighter weight which is 25% weight reduction compared to conventional anchors and high holding power makes it good stability and then it is commonly used as the main anchor on large container ships, the car carries and supertankers. It has an excellent performance in a variety of soils.

High Holding Power (HHP) Pool Anchor N Type

Pool anchor is one type of stockless high holding power anchor. It is used as a bow anchor when sailing. Its weight can be lighter by 25% than standard weight.N-type HHP pool anchor is designed to fit into small anchor pockets on modern ships and the hollow flukes are welded from two plates to create strong anchoring performance under various circumstances. This construction gives the anchor a large resistance against bending forces. The applications of the pool anchor are large yachts, cruise vessels and container vessel ships.

High Holding Power (HHP) Pool Anchor TW Type

Pool anchor TW is one type of stockless high holding power anchor. The TW type pool HHP anchor has more than 2 times holding power than the conventional anchor of the same weight. The anchor has large flat flukes made out of high tensile steel plate material. The thickness varies from 15 mm up to 140 mm depending on the anchor size. It allows a weight reduction of 25% compared to a conventional anchor for the same equipment number It has a fully balanced type and unbalanced type. The fully balanced type always has its flukes in a vertical position while lifting the anchor. The unbalanced type will tip over to one side.

YSmarines is a high holding power anchor manufacturer with the advantage of rich source, good quality and service.