Wholesale USB Wax Warmer Operation - Place on level, heat-resistant, stain-resistant surface. - Insert the micro USB connection end to the ceramic melter. - Place 2-3 wax bears, or 1 oz of wax melts, in the top fragrance tray of the wax warmer. You can use your Mini USB Warmer either with or without the silicone dish. - Insert the plug into the wall outlet (or) insert the end of the USB adaptor into the USB slot of an electronic device. - The 鈥淥n鈥?light will show when the two connections are made; do not move the unit while it is on. - Once wax melts, fragrance will fill your room. - Unplug the appliance from the USB port, or wall outlet when not in use or when left unattended. Tips - If wax spills on the wax warmer, use a plastic spatula to scrape the wax off once unit has cooled. Use a paper towel to rub off any remaining wax once burner unit has cooled. Do not use metal or any other sharp objects to scrape off melted wax - Do not add water or any liquid to the top fragrance tray in conjunction with the wax melts. - Once wax has been melted by the wax warmer, do not handle the unit until it is completely cooled. Melting no more than 2-3 wax melts is recommended. Important Safeguards Do not use appliance for anything other than intended use. Do not place appliance or cord on or near a hot gas or electric burner or in an oven. Do not touch while in use鈥攈eated wax can cause burns. Allow unit to cool completely before touching. Do not operate when the appliance is not working properly or when it has been damaged in any manner. Do not use the warmer if the power cord is frayed or damaged or if any bare wires are exposed. Product Show About Us Wholesale USB Wax Warmer website:http://www.walkerscent.com/electric-wax-warmer/usb-wax-warmer/